Superglue 20g viscous

Working time 30 to 40 seconds

Superglue 20g viscous

Working time 30 to 40 seconds

Product information

Perfect medium-viscosity instant adhesive, working time 30-40 s, firm bond 1.5-2 minutes. For bonding wood, metal, most plastics incl. EPP/EPO (not suitable for foamed polystyrene, polyethylene and Teflon). Package contents: 20g bottle.

The medium-viscosity superglue (cyanoacrylate adhesive) for model making and also for general use. It is supplied in a bottle with an application attachment.

The thick superglue with a high viscosity is ideal for bonding absorbent and non-absorbent materials that fit together perfectly. It bonds wood, most plastics, metal, rubber, glass, ceramics, cork and paper. Typical method of application: The adhesive is applied to the joint of perfectly aligned parts that are joined together. Some adjustment of the mutual position is possible for a short time before the adhesive hardens.

Properties

• Color: clear
• Viscosity: 800-1200 mPa.s
• Density: 1.04 g/cm³
• Optimum temperature for application: 23 °C
• Curing time (depends on the temperature and the type of materials bonded): 5-40 s
• Full curing: 24 h
• Optimum gap width between bonded parts: Zero
• The cured adhesive is soluble in: Acetone, dimethylformamide, acetonitrile.

Remove excess uncured adhesive:

Cloth or paper tissue moistened with KAV9979 CA cleaner or acetone (if the materials to be bonded are resistant to it).

Can superglue be diluted?

If superglue thickens, this is a sign that it has already partially polymerized and is losing its original properties - they cannot be reversed by dilution. If you need a thinner superglue, simply use the type with a lower viscosity. Individual types of KAVAN CA superglues can be mixed together to achieve optimum viscosity.

Suitable for bonding which materials:

soft and hard wood, chipboard, plywood, metal, ceramics, porcelain, glass and carbon laminates, glass and carbon fabrics and fibers and many plastics (incl. EPP and EPO).

Unsuitable for bonding the following materials:

foamed polystyrene, polyethylene, Teflon and silicone.

Storage:

in tightly closed packaging, in a cool, dry and dark place (at temperatures between +2 °C and +10 °C ). Do not expose the adhesive to temperatures below +2 °C.

The printed date is the date of manufacture

Signal word:

Caution

Hazard statements

• H315 Causes skin irritation.
• H319 Causes serious eye irritation.
• H335 May cause respiratory irritation.

Hazard pictogram: GS07

Precautionary statements:

• P102 Keep out of the reach of children.
• P261 Avoid breathing dust/fume/gas/mist/vapor/aerosol.
• P264 Wash hands thoroughly after handling.
• P271 Use only outdoors or in a well-ventilated area.
• P302 + P352 IF ON SKIN: Wash with plenty of water/soap.
• P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
• P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing.
• P312 Call a POISON CENTER/doctor if you feel unwell.
• P332 + P313 If skin irritation occurs: Get medical advice/attention.
• P337+P313 If eye irritation persists: Get medical advice/attention.
• P362 Take off contaminated clothing.
• P403 + P235 Keep in a well-ventilated place. Keep cool.
• P405 Keep locked up.
• P501 Dispose of contents/container in accordance with regional regulations.

Always read and follow the information on the product label