Superglue Pattex glass 6g tube

PSV1C solvent-free

Superglue Pattex glass 6g tube

PSV1C solvent free

Product information

Specially designed for all types of broken glass. Bonds easily and invisibly, without solvents. Liquid formula is suitable for fast, precise emergency bonding. Safe to use on cutlery, dishwasher safe.

Product features:

• invisible bonding
• especially for glass
• dishwasher safe
• solvent-free

Range of application:

• Glass on glass
• Glass on metal
• Car rear view mirrors
• Tiffany lamps and vases, etc.

Application:

• All surfaces to be bonded must be clean (clean beforehand if necessary, provided the condition of the material permits), dry and a perfect fit, as the adhesive does not have gap-filling properties.
• For the first application, fully tighten the locking head clockwise about once (you should hear it click into place). For further application, remove only the upper cap. Apply only a small drop of Pattex Superglue Matic liquid to one of the surfaces. Press fluted buttons to dispense. The thinner the adhesive film, the faster and stronger the bond.
• Press the parts together immediately, holding for approx. 10-60 seconds depending on the material.
• Allow to cure for at least one hour.
• Best results are achieved when the adhesive is applied at room temperature (15-30 °C).

Tips & Tricks:

Superglues like the Pattex superglues Power Easy, Classic, Glass and Plastic but also the Pattex superglue Ultra Gel are very difficult to remove. The basis of all these adhesives is a cyanoacrylate.

Remove superglue from skin:

The first thing to say is that superglues are not dangerous to the skin. If you haven't just glued your fingers together, you can rest easy. The superglue reacts very quickly with the skin moisture and a film is formed, which can make the skin tense. Without treatment, however, the superglue will dissolve again after 2 days at the latest due to the skin moisture or sweat. If you want to speed up the process, we recommend bathing your fingers in warm soapy water and slowly rubbing off the adhesive residue. It can also be helpful to apply a greasy skin cream on the edge of the glue. It can help the glue soften at the edge and gradually come off.

Signal word:

Warning

Hazard statements

• H317 May cause an allergic skin reaction.

Hazard pictogram: GHS07

Precautionary statements:

• P101 If medical advice is needed, have container or label at hand.
• P280 Wear protective gloves/eye protection.
• P333+P313 If skin irritation or rash occurs: Get medical advice/attention.
• P501 Dispose of contents/container in accordance with local/regional/national/international regulations.