Pattex P1BC1 all-purpose adhesive 100%

Pattex P1BC1, bottle 100g

Pattex P1BC1 All purpose adhesive 100%

Pattex P1BC1, bottle 100g

100% multi power glue

Strong in all conditions for the projects inside and around the house! Its high adhesive strength, even under extreme conditions, is what makes Pattex 100% special! It is waterproof and therefore suitable for indoors and outdoors. Its versatile product properties have even been confirmed and certified by TÜV Süd.

For low absorbent materials:

For low-absorbency, smooth materials (e.g., metal or glass), wipe both surfaces with a damp cloth immediately before applying Pattex 100%. A relatively thin layer of adhesive on one of the two surfaces is sufficient.

For highly absorbent materials:

Highly absorbent, very porous materials (e.g. wood) require a larger application of adhesive - in some cases even on both sides.

Use with paints:

Pattex 100% is suitable for painted surfaces and can be used with acrylic paints, DD paints (polyurethane paints) and alkyd paints without any problems. Pattex 100% is not compatible with one-component PU varnishes.

Preparation:

The surfaces to be bonded must be load-bearing, dry, and free of grease and dust. If necessary, clean substrates with solvent, e.g. benzine. Completely remove old adhesive and sealant residues as well as coatings that do not adhere properly. Protect adjacent surfaces by covering with foil or adhesive tape.

Apply adhesive:

The application of Pattex 100% depends on the materials to be bonded. As a rule, one-sided application is sufficient. The best results are obtained when the adhesive dries for 24 hours. The application quantity depends on the degree of absorbency of the material.

Fields of application:

• Plaster
• Zinc
• Metal
• Concrete
• Aluminum
• Polystyrene
• Ceramic
• PU rigid foam
• Glass
• Stone
• Leather
• Plastic
• PVC
• Textiles
• Fabrics
• Cork
• Iron
• Wood
• Steel