Model plaster 5 kg

Crown plaster for modeling and casting

Model plaster 5 kg

Krone plaster for modeling and casting

Product information

KRONE Model Plaster is a particularly fine, white plaster for modeling work, for casting molds and figures, for filling cracks and holes, but also for fine repair work.

Product properties:

• Manufacturer: Krone plaster
• 5 kg bag
• high grinding fineness
• Color natural white, light grey
• Contains no additives, is non-toxic and non-corrosive, as well as ecologically safe
• Can be painted over after curing and priming
• Processing time approx. 15 minutes
• Swelling approx. 2 mm/m

Processing instructions:

• Slowly sprinkle the gypsum powder into the mixing water
• Stir vigorously and intensively after approx. 2 minutes soaking time
• Only use stainless steel tools for processing
• Clean tools with water immediately after use
• The processing temperature should not fall below +5°C
• Allow to harden sufficiently before priming
• For modeling, use approx. 5-6 liters of mixing water for 10 kg of KRONE model plaster
• For casting use approx. 7 liters of mixing water for 10 kg of KRONE Model Plaster