Activator spray for superglue

150ml spray can

Activator spray for superglue

150ml spray can

Product information

Activator/accelerator for instant adhesives (cyanoacrylate adhesives) in aerosol packaging. It is used to accelerate the curing of instant adhesives in conditions unfavorable for their natural curing (by reaction with air humidity or water in glued parts), in dry environments, in the cold, when gluing inactive materials or when applying a thick layer of adhesive. The product contains its own component that activates the polymerization of the instant adhesive, volatile solvents and the propellant gas (propane / butane). For this reason, it must not be used for bonding materials that are not resistant to organic solvents (e.g. foamed polystyrene).

Application:

The activator is applied to clean and dry surfaces from a distance of 20-25 cm. The optimum working temperature range is between + 10 °C and + 30 °C. It can be applied in two basic ways:

Small parts:

Apply the activator to a surface to be bonded and allow it to dry (it remains active for several hours). Then apply the superglue to the second contact surface and assemble the parts.

Large parts: Apply the superglue to one contact surface, press the parts together and spray the joint with an activator.

Suitable for:

Superglue for bonding materials that are resistant to organic solvents.

Unsuitable for:

foamed polystyrene and other materials that are not resistant to organic solvents or elevated temperature (accelerated polymerization of the adhesive can release a considerable amount of heat, which leads to heating of the adhesive joint and its surroundings - the greater the amount of adhesive used).

Storage:

In tightly closed packaging, in a cool, dry and dark place (at temperatures between + 5 °C and + 25 °C). Do not expose the product to temperatures below + 2 °C.

Shelf life:

If the conditions for proper storage are observed, we guarantee the shelf life in the unopened original packaging for a period of 1 year while retaining the above-mentioned product properties.

Signal word:

Danger

Hazard statements

Hazard pictogram: GHS02, GHS07, GHS08

Danger Contains: Pentane, N,N-Dimethyl-p-toluidine Extremely flammable aerosol. Pressurized container: May burst if heated. Harmful if swallowed. May cause drowsiness and dizziness. Toxic to aquatic organisms, with long lasting effects. Keep out of the reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke. Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use. Avoid inhalation of aerosol. Use only outdoors or in a well-ventilated area. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Protect from sunlight and do not expose to temperatures exceeding 50 °C. Dispose of contents/container to hazardous waste collection point.

UFI: 4XJV-X0A3-T00N-W9WM